Precession depth micrometer-FAT HEAD  Measurement: 2.5 Micron Click to view

 

                              

              

               

Cascade Microphones Ribbon Microphone

 

Cascade GOMEZ - Michael Joly Edition

EM Editors Choice 2009 Award Winner

Assembled in the USA

Click on EM logo to read the Dec. 2008 review

 

Click on TAPEOP logo to read the July. 2008 review

 

GUITAR:
With the Gomez I have been able to achieve the most breath taking distorted rock guitar sound I have ever heard.  It's taken me a lot experimenting, but combining the Gomez with my vintage 421 at 4" from the cab and centered on the cone resulting in breath taking results.  The Gomez was run into my Vintech X73i (using the EQ section to tame the low frequency build up from close mic'ing ) and was combined with the signal of my Vintage 421 through a Groove Tubes SuPre to bring out some bite.  both mic's were then run into my Drawmer 1968 ME compresser to leave me completely awestruck.


VOCALS:
Holy crap!  this mic sounds amazing.  Its completely different from my Neumann TLM103, but the combination of the two is stellar!  I found this mic is THE perfect mic for backing vocal tracks and my voice.  It adds dimension that a Condenser can not give.  Excellent for building up the spacial dimension of a vocal mix.

TAMBOURINE:
Would you guess this mic sounds ridiculously good on tambourine?  Placed at about 2-3 feet from the tambourine and above it by about a foot or two and pointed down towards the tambourine it sounded like HEAVEN!  I've never in my life heard a tambourine sound that good.  my only words are "holy crap."  Preamp used was my Groove Tubes SuPre.
Tambourine sound recorded seemed a bit "vintage" but it was soooo sexy I couldn't help but point it out to everyone that heard the song.  Not even a little bit brittle or "cheap"  This mic sounds like THE REAL DEAL.

ACOUSTIC GUITAR:
I really wish I had two of these mic's because it sounded "THAT GOOD."

Michael Congilosi
Sunken Moon Productions, DBA

www.myspace.com/mikeplacement

Industry leaders collaborate on quality assurance program and new ribbon mic release

Olympia, WA. January 9th, 2008 Michael Chiriac, CEO of award-winning Cascade Microphones has launched the "Gomez" Michael Joly Edition ribbon microphone. The new "Gomez" ribbon mic, completely hand-assembled and certified at the Cascade Microphones lab in Olympia, Washington is the result of a new collaboration between two industry leaders.

Cascade Microphones CEO Michael Chiriac asked Michael Joly - a trusted source of microphone modifications - to approve the design, specifications and manufacturing of the new "Gomez" microphone. Chiriac said: "After receiving a 2007 PAR Excellence Award for our FAT HEAD II ribbon mic at AES in October I wanted to push the quality envelope for ribbon mics even further. As Michael Joly is a well-known and trusted name in microphone upgrades I contacted him to see if we might work together on a design and quality assurance program for a new ribbon mic."

The new Cascade Microphones "Gomez" Michael Joly Edition ribbon mic uses a short, single-ribbon motor for broad vertical and horizontal pickup free from the off-axis coloration found in dual ribbon mics. The structure of the "Gomez" ribbon motor provides a tailored high frequency response ideal for guitar cab use or vintage-sounding "soft top" vocals. In a new innovation, the ribbon motor is installed in an optimized headbasket – a round, single layer grille designed to offer an open sound with reduced internal standing waves. Michael Joly notes: "While there are many design features that contribute to great microphone performance, part of my success upgrading microphones can be attributed to the use of a single-layer grille. A single layer grille reduces standing wave reflections between the grille and transducer to allow recordings with greater clarity".

The Cascade Microphones "Gomez" Michael Joly Edition features a renowned Lundahl ribbon mic transformer, custom PC board, high-quality Switchcraft XLR connector and Evidence Audio ™ LYRIC HG wire with IGL copper. The microphone is packaged in a sturdy and attractive aluminum case with shock mount. It comes with a signed and dated "Certificate of Performance" documenting a multi-step inspection, assembly and performance approval process - including certification of proper ribbon tension.

Click here to order from Michael Joly Editions

Click here to order from Cascade Microphones

#########

For more information, press only:

Michael Chiriac
CEO, Cascade Microphones
3720 Gravelly Beach Loop NW
Olympia, WA 98502
(360) 867-1799

Award-winning Cascade Microphones is a leading manufacturer of affordable, high quality ribbon and condenser microphones.

Michael Joly
Founder, OktavaMod15
Mountainview St.
Springfield, MA 01108
(413) 627-5513

Michael Joly, founder of OktavaMod, is a trusted source of professional microphone modification and upgrade services.

  © 2000-2008 CASCADE MICROPHONES. All Rights Reserved 

a division of Bayview Pro Audio Inc.