The Cascade V57 offer a 1.07" gold plated
capsule and is a transformerless design. This microphone is suitable for
most studio applications and is an exception value for project and pro
studios alike. The frequency response is somewhat flat with a bump between
10-20k. The microphone includes a -10dB Pad and a 150Hz low-cut switch on
the back-side of the microphone. Extensive detail has been taken to assure
that the audio quality and exterior finish meets the highest standards.
High pass filter:150Hz low-cut switch
@ 6dB per octave
Impedance: 150ohms
Sensitivity: 15mv/Pa
Max SPL: 137dB
Signal to Noise Ratio:74dB (Ref. 1Pa
A-weighted per IEC268-15)
Equivalent Noise Level: 15dB (A
weighted IEC 268-4)
Power Requirements: 48V Phantom Power
(+- 4V)
Size: 60mm x 160mm
Weight: 540g
Supplied with suspension shockmount
Includes EVA lined custom carrying
case
Cascade M39 - 22mm Small Condenser
The Cascade M39 is a cardioid
condenser that has a 22mm diameter diaphragm. The Cascade M39 has
a silky, open audio quality with a wide dynamic range essential
for accurate, instrument recording and is ideal for use as drum
over heads, hi-hat, snare, or acoustic instruments such as guitar
and piano. The M39 features a high SPL rating of 137 dB and is
capable of capturing even the loudest of audio sources. The M39 is
a compact microphone that is great for recording a wide range of
instruments and is in use in professional and project studios
around the world.
Specifications:
22mm diameter diaphragm
Power: P24V or P48V Phantom
Power
10dB switchable attenuation, selectable
-10dB low-frequency roll-off
Phasing: Positive pressure on
diaphragm generates a positive voltage on pin #2 relative to
pin #3
